How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28897
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Having trouble with pto working, 7710MFWD RW7710R003330, yes

Customer Question

having trouble with pto working
JA: What is the complete model and serial number of your machine?
Customer: 7710MFWD RW7710R003330
JA: Are you fixing this yourself? What have you tried so far?
Customer: yes the pto starts then stops with the button still on
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: no
Submitted: 3 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 3 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 3 months ago.

New Holland 7710 or Deere 7710? Either way, with electric switch for pto, it has a solenoid valve at the pto valve, Is the voltage dropping at the solenoid , or if voltage stays at battery voltage to the solenoid, the solenoid needs to be checked. If not a solenoid problem, the pto clutch may be bad.

Customer: replied 3 months ago.
it turns on but kicks out when it gets warm if I shut it off and wait awhile it will start up and run for a bit
Expert:  Curtis B. replied 3 months ago.

Replace the solenoid coil.

Expert:  Curtis B. replied 3 months ago.

I see question is still open, did you see my response? Please rate to close the question and get me credit!