How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28683
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a jd d130 and blades will not engage belt doesn't seem

Customer Question

have a jd d130 and blades will not engage belt doesn't seem to get tight enough cable?
JA: What is the complete model and serial number of your machine?
Customer: m(###) ###-####5 s 120618yg70855
JA: Are you fixing this yourself? What have you tried so far?
Customer: I am the only thing I have done is adjust belt tighter still quite loose
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: no'
Submitted: 4 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 4 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Customer: replied 4 months ago.
ok
Expert:  Curtis B. replied 4 months ago.

Will be the cable or the tension spring shown on the idler, Is spring in place? See link below.

Expert:  Curtis B. replied 4 months ago.

Opps! deck link below # 11 is spring,

Expert:  Curtis B. replied 4 months ago.

I was looking for the drive pulley to be sure it did not have electric clutch!

Expert:  Curtis B. replied 4 months ago.

Cable has to move the idler lever and spring , to hold belt tight.