How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 524
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

Need to know how to do the adjustments on an automatic tie

Customer Question

Need to know how to do the adjustments on an automatic tie on an 851 round baler. When the belt is running the shaft that comes thru the clutch is not engaging.
JA: What is the complete model and serial number of your machine?
Customer: It is a New Holland 851 5x5 Round Baler. It is chain driven. I am going to go get the serial number now.
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: do you still need the serial number?
Submitted: 5 months ago.
Category: Agriculture and Farm Equipment
Customer: replied 5 months ago.
Have not received any answers yet?
Customer: replied 5 months ago.
When the bale is full and ready to be tied the pulley spins on the shaft that trips
The arms doesn't work.
Expert:  dd85 replied 5 months ago.

Please see attached.

The first thing I would check is Parts picture ref 35 and 36 are they turning freely.

Next is ref 34 swinging back and forth?

The you could start adjusting.

Expert:  dd85 replied 5 months ago.

There are 2 different parts list depending on the serial number.

Expert:  dd85 replied 5 months ago.

Did the attachments download okay?

Please remember to Rate my answer.