How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28631
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Which seal in the kit is filler ring? deere model 270 skid

Customer Question

which seal in the kit is filler ring?
JA: What is the complete model and serial number of your machine?
Customer: John deere model 270 skid steer bucket tilt cylinder KV0270A170355
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Heavy Equipment Mechanic I'm going to connect you with knows all the tricks and shortcuts.
Customer: Which ring in the seal kit is the filler ring? on the bucket tilt cylinder
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: no I don't think so
Submitted: 9 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 9 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 9 months ago.

Filler ring? That goes under the piston seal? # 11 ?? See link above.

Expert:  Curtis B. replied 9 months ago.

I see question is still open. Did you figure it out?

Customer: replied 9 months ago.
The iler ring is installed to release the inner snap ring to remove rod guide the seal kit does not breakdown the contents I was looking to see which one it is
Expert:  Curtis B. replied 9 months ago.

Did you figure it out? For o'ring to be used as a filer , to keep snap ring from catching,it has to be a harder durometer than most rings and would have to be larger than the bore it goes in.