How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 9439
Experience:  34 + years as a mechanic
6825259
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a x2300 that is used entirely off road. When I plow I

Customer Question

I have a x2300 that is used entirely off road. When I plow I would like a spot light mounted on the roll bar. I bought an optronics TL 35FS Tractor and utility light. Can I disconnect the tail lights and use the hot wire from the tail light for this light. It is 55 watt, 12 volt quartz halogen bulb. If not, can I run a hot wire direct from the battery??
Submitted: 8 months ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 8 months ago.

Hi I'm Wayne

I will help you with this

you need to worry about the amps,

I suggest to use a 10 Ga wire from battery to fused switch

then to light, then you will not have any issues

I hope this helped you

Hi. If this helped you,

Please remember to rate my answer 3 or more stars.

I do not get paid for question, unless you rate my answer

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Expert:  Wayne replied 8 months ago.

HI

The wire Ga was a typo should read 12-14 Ga

Expert:  Wayne replied 7 months ago.

Morning

Just a follow up with you

did my answer help you

Let me know, Please

Wayne

Related Agriculture and Farm Equipment Questions