How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3515
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Working on 4030 with a loader on it. trying to replace the

Customer Question

working on 4030 with a loader on it. trying to replace the main hyd line down the driver side frame. old one came out in two pieces.
JA: What is the complete model and serial number of your machine?
Customer: dont have it with me right now
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: nope
Submitted: 8 months ago.
Category: Agriculture and Farm Equipment
Expert:  John Oliver replied 8 months ago.

good afternoon my name is ***** ***** i still assist you with this issue?

Customer: replied 8 months ago.
Expert:  John Oliver replied 8 months ago.

something about payment failure would not allow the call to go threw but... i think we can do it threw here ok

Expert:  John Oliver replied 8 months ago.

what you will need to do i support the engine from the top or bottom. support the front axle so that it does not pivot. remove side frame bolts and remove side frame. replacement then is supper easy. it is very critical that you loc tite the frame bolts and torque. i will look up the torque spec for you and reply back with that info. Does all that make sence?

Related Agriculture and Farm Equipment Questions