How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 520
Experience:  Service manger for over 18 years in same Dealership
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

Case JX95 Upgrade. I need to replace bearings and seals on

This answer was rated:

Case JX95 Upgrade. I need to replace bearings and seals on emplement lift support bolted to bottom rear of transmission case. I need to remove the support and would like to know if the transmission case oil flows into the lift support or are the mounting surfaces solid?
JA: What is the complete model and serial number of your machine?
Customer: JX95 Upgrade Tier 2 (1/06) Serial HFJ020255
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: No

You will have to drain the hydraulic oil to remove this cover.

Yes it is part of the reservoir.

Did this information help you?

Please remember to Rate my answer.

dd85 and 2 other Agriculture and Farm Equipment Specialists are ready to help you

Related Agriculture and Farm Equipment Questions