How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3515
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Massey 375 lift arms on 3 poibt hitch not lifting, 375 2wd

Customer Question

massey 375 lift arms on 3 poibt hitch not lifting
JA: What is the complete model and serial number of your machine?
Customer: 375 2wd 5006
JA: Are you fixing this yourself? What have you tried so far?
Customer: yes made sure has oli and all levers were in correct position, quit sudenly
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: just put in new clutch assembly
Submitted: 9 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 9 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 9 months ago.

Do levers feel the same? Hydraulic pump is in the rear end housing, below the three point housing You say you you have replaced the engine/pto clutch ? Do you have any other hydraulics on tractor, no front end loader? Steering works ok?

Customer: replied 9 months ago.
Steering working. Front loader working but slow
Expert:  Curtis B. replied 9 months ago.

Front loader have its own pump or shares pump with three point? No added pump on the front of engine for the loader? Do the lift arms have any movement? Will they stay up or do they leak down? Were they under load when they failed?