How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Oliver Your Own Question
John Oliver
John Oliver,
Category: Agriculture and Farm Equipment
Satisfied Customers: 201
Experience:  manager at White Eagle Ag and Truck Services
Type Your Agriculture and Farm Equipment Question Here...
John Oliver is online now
A new question is answered every 9 seconds

Deer 6430 trainsmission is flassing then is slipping,

Customer Question

John deer 6430 trainsmission is flassing then is slipping
JA: What is the complete model and serial number of your machine?
Customer: L06430d57086
JA: Are you fixing this yourself? What have you tried so far?
Customer: Yes i just check oil level cooland level clean ladiator clean all cooler
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: I check trainsmission presser is 180-200 psi is good presser
Submitted: 11 months ago.
Category: Agriculture and Farm Equipment
Expert:  John Oliver replied 11 months ago.

good afternoon Sackda my name is ***** ***** you give me the list of trouble codes and what controller they came from?

Customer: replied 11 months ago.
Trainsmission light flassing then trainsmission slipping
Expert:  John Oliver replied 11 months ago.

i understand that so if the light is flashing there will be codes. can you look in your ops manual for the procedure on extracting trouble codes?

Expert:  John Oliver replied 11 months ago.

were you able to retrieve any trouble codes?

Customer: replied 11 months ago.
It no trouble codes
Expert:  John Oliver replied 11 months ago.

if the trans light is flashing there are codes. unfortunatly without a code to work with i really cant help. there are dozens of reasons that the machine would do this and that is why a code is so important

Customer: replied 11 months ago.
Your got no answer for me thank
Expert:  John Oliver replied 11 months ago.

i need a code to start with. there are dozens of reasons this can happen so without a trouble i dont have an answer. are you able to get into diagnostic mode and extract a code as the operators manuel describes? if that light is flashing there is a code i promise you