How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Oliver Your Own Question
John Oliver
John Oliver,
Category: Agriculture and Farm Equipment
Satisfied Customers: 201
Experience:  manager at White Eagle Ag and Truck Services
93794869
Type Your Agriculture and Farm Equipment Question Here...
John Oliver is online now
A new question is answered every 9 seconds

My 4450 will not raise the 3Pt high enough it hasn't since I

Customer Question

My 4450 will not raise the 3Pt high enough it hasn't since I bought it can't move hay use post hole digger ECT I like the tractor but thinking about getting rid of it I need the 3pt
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  John Oliver replied 1 year ago.

good morning my name is ***** ***** questions before we get started.....

how are the rest of the high pressure hydraulics? steering SCV'S etc

does the hitch move up and down without a load? is it stuck down or up and not moving?

Customer: replied 1 year ago.
Bud presure is fine and arms move ok just not high enough
Expert:  John Oliver replied 1 year ago.

assuming an adjustment has not yet been preformed i can email you the procudure on how to do so if you can supply me with your email

Expert:  John Oliver replied 1 year ago.

have you tried to disconnect the raise control linkage and manually move to max up? possably and adjustment there as well that would be quick and easy

Customer: replied 1 year ago.
I will try to adjust the linkage but if I'm looking at it right there isn't much left
Expert:  John Oliver replied 1 year ago.

ill get the info scanned in and sent over. its possable that over the years the linkage has stretched from cab settling or cab removal. might be worth moving manually. is the depth control set to max?

Customer: replied 1 year ago.
I have moved the draft setting to give me max highth
Expert:  John Oliver replied 1 year ago.

ok. i emailed over the adjustment procedure