How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28080
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Daedong 35hp with 4 in 1 bucket. The bucket will

Customer Question

I have a Daedong 35hp with 4 in 1 bucket. The bucket will not open or close. Is this an electrical (solenoid) problem or hydraulics?
JA: What is the complete model and serial number of your machine?
Customer: daedong CK35 with an AL25 bucket
JA: Are you fixing this yourself? What have you tried so far?
Customer: I have attempted to trace any wiring fault and cant locate any obvious breaks in wires etc
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: that's about it
Submitted: 10 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 10 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 10 months ago.

Do you have a pushbutton to engage the bucket? Usually the bucket open/close is not done with solenoid. Do you have a two spool control valve or a three spool or a four spool? If 4way is done from two or three spool valve it will have a pushbutton and a solenoid back to work the other functions. If his function is attached to the control valve with quick connects, remove the two hoses for the bucket function, and reattach, Do not go by how the connections look, The quick connects have check valves in them, and if either connector moves back any at all, the check valve closes and no oil can flow, stopping the function.

Expert:  Curtis B. replied 10 months ago.

I see question is still open, did you see my response?