How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3641
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Timing on my 347 baler, the needles don't go all the way

Customer Question

timing on my 347 baler
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: the needles don't go all the way down and when I start putting the pto on and bale both shear pins break
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: when have replaced the idler spoket the chain has a little wear could of jumped a link
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  John Oliver replied 1 year ago.

good morning my name is ***** ***** sorry for the delay, do you still need help with this?