How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 5141
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment, trucks and farm equipment - 1995 WyoTech graduate.
Type Your Agriculture and Farm Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

I have a D4506. My 3 point will not lower. I bleed it and it

Customer Question

I have a D4506. My 3 point will not lower. I bleed it and it will go down. When I turn the tractor on it goes back up.
Submitted: 11 months ago.
Category: Agriculture and Farm Equipment
Expert:  Dan replied 11 months ago.

Hi Ken, My name is***** will be glad to try to help. Check the control valve for damage, sticking, and debris inside causing the valve to stick in the raise position. Let me know

Customer: replied 11 months ago.
Any pointers would be great.
Expert:  Dan replied 11 months ago.

Sure, First check the control valve for sticking as if this is going up on its own it points to a valve sticking or bypassing internally allowing pressure to pressurize the cylinder. Let me know