How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 5169
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment, trucks and farm equipment - 1995 WyoTech graduate.
65405794
Type Your Agriculture and Farm Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

M135X Tractor will go in reverse but will not go forward.

Customer Question

M135X Tractor will go in reverse but will not go forward. Code E-R44 Tried changing switches on top of transmission using Low switch and changed with the shift switch (not high) Tractor moves about 2" in forward stops and gives code. We are 100 miles from closest dealer but have talked with service department.
Submitted: 12 months ago.
Category: Agriculture and Farm Equipment
Customer: replied 12 months ago.
Operating round baler. The second last bale tractors shifted hard into forward, jumped ahead. Next bale backed up and would not go forward. Checked hydraulic oil and it was down as we found leaky hydraulic hose. Topped up oil but still only reverse
Customer: replied 12 months ago.
I am in the office on the computer but could have ranch manager phone with more detail if appropriate
Customer: replied 12 months ago.
One service manager on phone guessing could be #8 master solenoid inside transmission. Our decision is if a Kubota tech can diagnose and repair problem in our shop or do we need to truck it 100 miles.
Expert:  Dan replied 12 months ago.

Hi my name is***** will be glad to try to help. Field service is possible but the cost for field service will be more especially if there is more than one day involved. It is always best whenever possible to bring it to the shop.

ER44

A Shifting is performed using the

shift buttons.

A Hydraulic switch trouble.

A Main spool trouble.

A Started by operation of the shift

buttons,

shuttle lever, and clutch pedal.

A Trouble with master clutch

hydraulic switch trouble.

A Low system hydraulic pressure

Expert:  Dan replied 11 months ago.

Hi Gil, Did you get this resolved?

Related Agriculture and Farm Equipment Questions