How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28331
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

T1010 will not start or roll over, no glow plug light when I

Customer Question

T1010 will not start or roll over, no glow plug light when I turn the key
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

Battery voltage? Has to have at least 12. 5 volts. With glow plug light not coming on, it appears there is no power to the keyswitch. The voltage comes direct from the positive battery cable terminal on the starter solenoid. It then goes to the fuse panel , to the keyswitch. Are fuses good?

Expert:  Curtis B. replied 1 year ago.

I see question is still open, did you find my response? Find problem?

Related Agriculture and Farm Equipment Questions