How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3510
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 2840, code 2845B, Sr# 241845L. One of the

Customer Question

I have a 2840, code 2845B, Sr# ***** One of the attachment fittings that attaches the injector line to the pump top broke off, facing the block. I have to Pull the injector pump to get to the port with an "EZout" to extract the bottom portion of the attachment enable to replace it. What are the steps to pull and replace the injector pump?
I know this is a very critical to the timing of the engine, I have experience in this area of mechanic but need detail instruction.
Hope you had a great 4th of July. Pete
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  John Oliver replied 1 year ago.

good morning Pete my name is ***** ***** I assume your working on a John Deere?