How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28683
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a L3901 with a Land Pride Post Hole Digger. I am not

Customer Question

Hi, I have a L3901 with a Land Pride Post Hole Digger. I am not getting enough downward pressure on the digger. Any suggestions/ I just switched the post hole digger for a mower, then switched back
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

Down pressure is through a hydraulic cylinder. Are you getting pressure to the cylinder from the control valve? Or could one of the quick connects not be making the full connection? Remove the quick connects and reconnect them, do not go by what they look like, disconnect and reconnect.

Customer: replied 1 year ago.
Ok I will go do that now
Expert:  Curtis B. replied 1 year ago.

Did you find the problem?