How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bradley Martin Your Own Question
Bradley Martin
Bradley Martin,
Category: Agriculture and Farm Equipment
Satisfied Customers: 175
Experience:  Field Technician at Thompson Tractor Company
29889544
Type Your Agriculture and Farm Equipment Question Here...
Bradley Martin is online now
A new question is answered every 9 seconds

I HAVE REMOVED THE GREASE FITTINGS FROM MY KX 161 SUPER

Customer Question

I HAVE REMOVED THE GREASE FITTINGS FROM MY KX 161 SUPER SERIES 3 BUT NOT HAVEING ANY LUCK GETTING THE IDELERS BACK
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Bradley Martin replied 1 year ago.

Hello Jerry

I will be assisting you today I would get a 4x4x4 or whatever you got laying around 2x4 would probably work to stick it right in front of the idler and roll the track around both track needs to be off the ground to do this put the blade down in front and swing around and put the bucket down to raise the whole machine then work the tracks around with a board to get the idlers to suck in let me know if you need anymore help

Expert:  Bradley Martin replied 1 year ago.

Any update on your track issue?