How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 514
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

How do you adjust the string cutter on a New Holland 847

Customer Question

How do you adjust the string cutter on a New Holland 847 Round Baler? It is a manual type--not auto.
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 1 year ago.

See attached info from the Operators Manual.

make sure the knife edge is straight and they can be turned over and the other side used.

Not really much adjustment. the Tube hits the "u" shaped bracket and the knife drops down. Is the knife when down solid?

Expert:  dd85 replied 1 year ago.

Do you need more information?

If this answered your question Please remember to Rate My answer.

Customer: replied 1 year ago.
I need more information. I have used the directions from the manual, but that hasn't helped. Could there be something else wrong other than the knife? It just stopped working all at once.
Expert:  dd85 replied 1 year ago.

Okay, tell me a little more.

does the twine arm bring the twine across the anvil? (anvil is what the knife goes against)

does the knife go done flat?