How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28370
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Why would Three bores be marked in ,motor only

Customer Question

Why would Three bores be marked in for cylinder ,motor only 200 hours old
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.
How is the ring wear? What is the end clearance on the top ring stuck into the bores? If excessive clearnce, you have wear from dirt entering the system! Air cleaner may not be sealed. allowing dirt to enter cylinders. How do the pistons look? Any scuffing, indicating a lack of lubricant?
Expert:  Curtis B. replied 1 year ago.
Was there any evidence of fuel in the oil? Please rate to close.

Related Agriculture and Farm Equipment Questions