How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28084
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How to change lower seal on 503 bush hog

Customer Question

how to change lower seal on 503 bush hog
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

The lower blade holder has to be removed. The # ***** snap ring, and then washer, to expose the seal. Then it can be removed.

Expert:  Curtis B. replied 1 year ago.

# ***** is the seal.

Customer: replied 1 year ago.
do you have to have a puller to remove blade holder and it looks like some kind of spring loaded cone was under it that has come apart
Expert:  Curtis B. replied 1 year ago.

Shows no spring loaded cone! And holder is on splined shaft, so not as tight as the tapered ones. But it can be rusted on nda puller may be necessary!