How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28657
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How do you get the end of the hydraulic cylinders out to

Customer Question

how do you get the end of the hydraulic cylinders out to replace packings on jd round baler 530
Submitted: 2 years ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 2 years ago.

http://jdpc.deere.com/pimages/EP14/EP1420_________UN01JAN94.gif

Expert:  Curtis B. replied 2 years ago.

Which cylinder? This is standard gland nut , that screws out.??

Expert:  Curtis B. replied 2 years ago.

Deere also likes to use a snap ring that keeps gland from going into the cylinder, on it, you remove snap ring. tap gland in until the inner snap ring is exposed, remove it then pull out the gland and rod.