How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 524
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I have a new Holland 664 round baler that is not cutting the

Customer Question

I have a new Holland 664 round baler that is not cutting the net rap. I put new knifes in it but it cuts ragged and some places not at all. my book dose not show but I don't know if they should be turned so the bevel is not flat to the serrated bar. I put them in as they were before.
Submitted: 2 years ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 2 years ago.

I have attach some things that should help you.

first I would try tightening the net brake.

The guide should be above the knife sections. The bevel edge of the knife sections should be facing away from the guide.

Also the knife assembly must fall freely when released. if not you will get ragged cut.