How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 9442
Experience:  34 + years as a mechanic
6825259
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

Many holes in the rear crankshaft bearing do I just need to

Customer Question

many holes in the rear crankshaft bearing do I just need to align any one with the hole in the plate
Submitted: 2 years ago.
Category: Agriculture and Farm Equipment
Customer: replied 2 years ago.
new bearing
Expert:  Wayne replied 2 years ago.
Hi I'm Wayne I will help you with this what are we working on, make and model
Customer: replied 2 years ago.
20 hp Onan Model B48GGA020
Expert:  Wayne replied 2 years ago.
Thank you for that you need to align the hole with bearing to the hole in the rear plateI believe there are 2 holes in the plate If this Helped you please Rate My Answer 3 stars or moreIf you need more infoUse the request Button, not a Poor/Bad Rating Thank You Wayne
Customer: replied 2 years ago.
There is one hole in the bore where the bearing goes and two holes where the seal goes the bearing itself has 5 holes and one slotted hole
Customer: replied 2 years ago.
There is one hole in the bore where the bearing goes and two holes where the seal goes the bearing itself had 5 holes and one slotted hole
Expert:  Wayne replied 2 years ago.
Hi Sorry for delay
use the slotted hole
Wayne
If this Helped you please Rate My Answer 3 stars or more
If you need more info
Use the request Button, not a Poor/Bad Rating
Thank You
Wayne