How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3604
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a 801d and the lift goes 2/3 the way up.but we have o

Customer Question

Have a 801d and the lift goes 2/3 the way up.but we have o drift issues with weight on we are trying to get top plate off and it wont move
Submitted: 2 years ago.
Category: Agriculture and Farm Equipment
Customer: replied 2 years ago.
lift lever has no resistence from down position up to 1/3 from bottom
Expert:  Curtis B. replied 2 years ago.
Did you get the three point cover off? It is held with the bolts, and has dowel pis that keep it aligned. The dowels will make it hard to get off. Use a big bar and pry up under the lift arms, not under the plate!