How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3515
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I installed a westendorf front end loader on a b2100hsd and

Customer Question

I installed a westendorf front end loader on a b2100hsd and now the 3 point will not do anything. everything works as expected and when the loader is raised and lowered the oil level changes in the transmission.
Submitted: 2 years ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 2 years ago.
Are you using the original pump? How do you have the loader supply plumbed to the tractor? Are you using the remote hydraulics or a separate supply port? When a loader is installed, it will use the oil from the transmission, so it is normal to overfill the system by about a gallon to compensate for the loader cylinders.