How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28894
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

2615 4wd pull lever popped up after hitting a stump to a position

Customer Question

2615 4wd pull lever popped up after hitting a stump to a position farther than normal 2wd position, can this be repaired easily and how?
Submitted: 2 years ago.
Category: Agriculture and Farm Equipment
Customer: replied 2 years ago.
This is not satisfactory way of doing business!
Expert:  Curtis B. replied 2 years ago.
What is the make of 2615? Not a common number! I will apologize for site, but I have been flooded and out of power for two days!! Form just reading your statement, the pto lever and cover may need to be removed,and the fork reset to get unit back where it belongs!
Customer: replied 2 years ago.
Massey, it's the 4wd pull lever out of position
Customer: replied 2 years ago.
Sorry about your situation and thank you for responding!
Expert:  Curtis B. replied 2 years ago.
Looking at the control, this is a pull control , going to the lever, to shift the FWD? Have you checked the lever, as to where it may have just twisted on the shaft? May need nothing but loosing the lever , moving it back to the correct position and re tighten.???
Customer: replied 2 years ago.
Gee I hope so, I'll give it a shot, thanks!
Expert:  Curtis B. replied 2 years ago.
OK, let me know. Thank you.