I have a Massey Ferguson 8450 tractor I bought four years ago.

Michelle,

I have little time until I must use the tractor, but will wait for your reply.

The four trouble lights came on after I replaced a fuse, touching another post in the panel while installing it. After that the lights started blinking when I started the tractor a few minutes later.

Can't find another fuse blown though. I am completing some maintenance today, further checking what the trouble lights refer to, although I'm pretty sure those are OK.

I am most concerned with the tractor if I drive it for a few days until I can have the error code reset . Can you tell me if the tractor is safe to drive without damaging another function, example: fluid pump, electric over hydraulic functions where lack of lube might damage something else. This is a large ag tractor 235 HP 2 wheel drive with front wheel assist. The front drive is electric actuated and elect. oil monitored.

I'll check emails every evening

Thanks

Grant Loveless

I unhooked the negative battery cable yesterday but not 3 times. I'll try it now. I'll let you know the result. The first unhooking still had the E-94 error code showing. I'll try 3 times. I talked to the factory rep, and it looks like if this doesn't work I will have to take it to the shop. I haven't pulled my tractor in that shop for less than $4000. The service people at AGCO don't show or have a record of this e-94 error code. I'm still working on it through the weekend. Let me know what you find.