How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cloe0626 Your Own Question
cloe0626
cloe0626, Auto Mechanic
Category: Acura
Satisfied Customers: 824
Experience:  was a mechanic in the army for four years and have been working at a dealer ship the past five years
74954164
Type Your Acura Question Here...
cloe0626 is online now
A new question is answered every 9 seconds

My 95 integra just died on me before I entered the freeway,

Customer Question

Hi there, my 95 integra just died on me before I entered the freeway, engine just turned off, tried starting and it took awhile before it started, went onto the freeway and it died again, now won't start. Changed distributor today and still won't start, it will turn but just won't start, anything else you can think of? Spark plugs changed 6 months ago as well.
Submitted: 1 year ago.
Category: Acura
Expert:  cloe0626 replied 1 year ago.

have you checked the timing belt

Customer: replied 1 year ago.
Not yet
Expert:  cloe0626 replied 1 year ago.

thats where i would start sounds like either the belt broke or it jumped time

Customer: replied 1 year ago.
I will take the valve cover off now and check thank you
Expert:  cloe0626 replied 1 year ago.

not a problem if you need anything else please let me know and be sure to rate my service when you get the chance

Customer: replied 1 year ago.
The timing belt is fine
Expert:  cloe0626 replied 1 year ago.

how about the crank shaft positioning sensor

Customer: replied 1 year ago.
Would that make the engine turn off?
Expert:  cloe0626 replied 1 year ago.

yes

Customer: replied 1 year ago.
I'm not sure how to check that sensor
Expert:  cloe0626 replied 1 year ago.

take a multimeter check for voltage at the sensor

Customer: replied 1 year ago.
Ok, what should the voltage read?
Customer: replied 1 year ago.
My crank position sensor is in the distributor since my car is obd1, brand new distributor put in