How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask thebesthonda Your Own Question
thebesthonda, ASE MasterTechnician
Category: Acura
Satisfied Customers: 783
Experience:  26 years experience
Type Your Acura Question Here...
thebesthonda is online now
A new question is answered every 9 seconds

Honda tech only 2015 honda Civic LX, 4dr VSA is OFF and tire

Customer Question

Honda tech only
2015 honda Civic LX, 4drVSA is OFF and tire pressure system is faulty , no codes anywhereI replaced the ABS module , evrything is working VSA , TPMS , no warring lights in the dash at all .
using my scanner ( maxi das )I tried to neutralize memory of all sensors ( which is recommended after changing the module ), after that I got the same problem again VSA not working , TPMS faulty .shall I buy another abs module , or there is away to fix that , like train the sensors or something
Submitted: 1 year ago.
Category: Acura
Expert:  Steve replied 1 year ago.

Did this just happen on its own or did this happen after repairs? Any recent accident damage done?

Customer: replied 1 year ago.
It happen after I neutralizing the memory of the sensors
Expert:  Steve replied 1 year ago.

What reading do you have for the steering angle sensor?

was there any accident damage?

Customer: replied 1 year ago.
as I told u after I replaced the ABS module with used one from another car , it worked perfect .
until I used the neutralize the memory of all it was very clear that I cuased the issue by erasing the memoery of the sensors , I need o know how to fix that ,
is there any way to relearn the sensors
Expert:  Steve replied 1 year ago.

There are no sensors in the wheels. The system takes readings from abs wheel speed sensor. All 4 tires must be the same size for the system to calibrate. You can try starting the calibration throng the steering wheel controls and center display.

Customer: replied 1 year ago.
this is for the TPMS calibiration , it doesn't do anything
Expert:  Steve replied 1 year ago.

features on the i-MID.
1. Turn the ignition switch to ON (w*1.
2. Press the MENU button to go to the
Vehicle Menu screen.
3. Select Customize Settings with the (+/(-
button, then press the SOURCE button.
4. Select TPMS Calibration with the (+/(-
button, then press the SOURCE button.
u The display switches to the
customization setup screen, where you
can select Cancel or Initialize.
5. Select Yes with the (+/(- button, then
press the SOURCE button.
u When the calibration is complete, the
The TPMS has been initialized.
message appears, and the display returns
to the customization menu screen.
• If the Unable to initialize TPMS. message
appears, repeat steps 4-5.
• The calibration process finishes
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.

Is this what you say does nothing??

Was this car in an accident?

Customer: replied 1 year ago.
doesn't do anythingcar was in accident , but as it was working OK until I erased the memory of the ABS ,then when I replaced the ABS module it worked ok , until I erased the memory on the new ABS .so the accident has nothing to do with the issue , becuase even after the accident , the ABS was working good .until I erased the memory , then when I replaced the ABS the prolem went away until I erased the memory again
Customer: replied 1 year ago.
if u dont know the answer please put it back i the poll