How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask thebesthonda Your Own Question
thebesthonda, ASE MasterTechnician
Category: Acura
Satisfied Customers: 783
Experience:  26 years experience
Type Your Acura Question Here...
thebesthonda is online now
A new question is answered every 9 seconds

2015 Honda civicHonda tech only ,VSA is OFF cannot turn

Customer Question

2015 Honda civicHonda tech only ,VSA is OFF cannot turn it on using the bottom for VSA
no cods on the EPS or ABS , VSAI have warning that TPMS is faulty , cannot communicate with TPMS module .speed sensors in all wheels working , I monitored them while driving , all reading same valuecar was minor front accident nothing near the tires , and TPMS and VSC used to work after the repair , but suddenly I have this issue
Submitted: 1 year ago.
Category: Acura
Expert:  Steve replied 1 year ago.
With the TPMS warning the VSA will not operate. the TPM system gets its information from the VSA module. Have you tried resetting the TPMS system?The first thing I would do is make sure the grounds are clean for the VSA/ABS module and all tires are the same size and pressure is correct.
Customer: replied 1 year ago.
there no communication with TPMS module as I mentioned , so I cannot reset itcan u share Pin layout for the VSA/ABS module so I can check the ground for the module
Expert:  Steve replied 1 year ago.
I will try to get you a pin out,right now Honda's site is down and I can not get in. You will not find a TPMS module since it is an indirect system using the wheel speed sensors for inputs.
Customer: replied 1 year ago.
another thing if there is open ground or any other fualt shouldn't this cause a code in the VSA/ABS module
I have zero codes
Expert:  Steve replied 1 year ago.
That may be true. I have a couple documents in an xps format for you to go through that may help. me know if you can not open them. I may have to convert them to pdf files at home tonight.
Customer: replied 1 year ago.
i cannot open these documents
Expert:  Steve replied 1 year ago.
Here try these PDF. files. They should work for you.
Expert:  Steve replied 1 year ago.
Were you able to open the PDF files?