Acura

Acura repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Acura Questions
My engine blew up back in October and rebuilt it from
My engine blew up back in October and rebuilt it from scratch. Put back together, start right up but through the p0341 code … read more
Julio Quispe
Julio Quispe
175 satisfied customers
Check emissions warning with engine light, and code p0341,
check emissions warning with engine light, and code p0341, 2010 tsx no starting problems,runs fine … read more
Eric
Eric
Retired
N/A
37,731 satisfied customers
My car was running fine I had a full tank of gas and rotated
My car was running fine I had a full tank of gas and rotated my tires after about two hours I went to start it and it sounded like a misfire or the spark plugs weren't getting any spark the car will n… read more
MASTER TECH
MASTER TECH
Master Tech
Vocational, Technical or Trade Scho
5,763 satisfied customers
My check Emissions system came on in my 06 acura tsx says
My check Emissions system came on in my 06 acura tsx says check vsa car won't start and i got an error code of p0341… read more
justinsbg
justinsbg
Acura Mechanic
Associate Degree
1,009 satisfied customers
I just bought mu son a 2002 Acura RSX, with 137k miles. The
I just bought mu son a 2002 Acura RSX, with 137k miles. The engine wouldn't rev over 4k so I knew this going into the deal but I got the car for a cheap price so a little work is ok. The code was P125… read more
Eric
Eric
Retired
N/A
37,731 satisfied customers
EL: I need to change the timing belt on a 2005 Acura EL with
I need to change the timing belt on a 2005 Acura EL with a 1.7L engine. Could you give me the step by step instructions to do this job? Thanks… read more
Eric
Eric
Retired
N/A
37,731 satisfied customers
TL: I have a 2005 acura TL 3.2L. I was putting a new timing
I have a 2005 acura TL 3.2L. I was putting a new timing belt on and the rear cam moved about 60 degrees or so clockwise. At least I assume it only moved 60 degrees and not 420 degrees. Regardless, the… read more
George H.
George H.
ASE Certified Technician
Associate Degree
471 satisfied customers
this question is worth at least $25.00 for a dealer employed
this question is worth at least $25.00 for a dealer employed tech with at least 5-7 yrs exp all others thank you anyway , in my shop I have a 2005 acura tsx 2.4 litre ive tech dbl over head cam,90.428… read more
Kyle N.
Kyle N.
ASE Certified Tech
Vocational, Technical or Trade Scho
631 satisfied customers
Acura TL 3.2: Installed new timing belt in 2005 Acura TL.
Installed new timing belt in 2005 Acura TL. Mistakenly rotated cam on front of engine w/OUT belt on, while trying to get cam gear timing mark aligned with timing mark on engine mounted backing plate. … read more
Chris (aka- Moose)
Chris (aka- Moose)
Acura Technician
Vocational, Technical or Trade School
287 satisfied customers
2005 Acura TL: timing belt..back together..crank..rear cam has moved
I have a 2005 Acura TL 3.2l I am in the middle of a timing belt change. It is all disassembled and I am starting to put it back together. The crank has moved and the rear cam has moved. How do I put t… read more
George H.
George H.
ASE Certified Technician
Associate Degree
471 satisfied customers
Run fine..accelerate..cam sensors, streched timing chain..solenoid
fault code p0341 car seems to run fine- except when you accelerate hard (above 400rpm on up) _it falls on it's face and sounds funny_ i heard it could be a few things : cam sensors, streched timing ch… read more
MASTER TECH
MASTER TECH
Master Tech
Vocational, Technical or Trade Scho
5,763 satisfied customers
Acura CL S: I need to know the correct valve lash and adjusting
I need to know the correct valve lash and adjusting procedure for a 2001 Acura CL type S 3.2L 225 hp V6. there was an attempt at adjusting them previously, and i believe they are too loose and its cau… read more
Neal
Neal
Auto repair pro, 30 years experience
Associate Degree
8,287 satisfied customers
Both cam sensors engin still runs rough cuts..cam sensor
code 0341 i replaced both cam sensors engin still runs rough cuts out still has cam sensor code also 1298… read more
1smartcarguy
1smartcarguy
honda service technician
Associate Degree
607 satisfied customers
Acura rsx type s: p0341 code, replaced cam sensor, replaced..solenoid
acura rsx type s throws p0341 code, replaced cam sensor, replaced vtc solenoid, still same. any other points to check?… read more
Steve
Steve
technician/service adviser
Bachelor's Degree
3,481 satisfied customers
2002 Acura RSX-S: a DTC # PO341, camshaft position sensor..immediatly
I am working on a 2002 Acura RSX-S 2.0. I detected a DTC # XXXXX camshaft position sensor, bank #1. I cleared the code once and it came back immediatly upon starting the vehicle. I then went to the de… read more
thebesthonda
thebesthonda
ASE MasterTechnician
High School or GED
785 satisfied customers
2004 RSX-S: cyl..the ECM or a VTC actuator..camshaft
my 2004 RSX-S is throwing a P0341 Code for the VTC phase gap after a small wreck that i was involved in, if you leave the car running for a bit it pops up with 5 more codes, misfire codes for cyl 1 th… read more
acramstr
acramstr
Shop foreman
Vocational, Technical or Trade Scho
5,531 satisfied customers
2002 acura rsx-s: accelerate..cam sensor..intake and exhaust cams
in my shop I have a 2002 acura rsx-s with 99 k miles, the car won't start or is really hard starting , the car won't idle or accelerate, the failure code which has been cleared a couple of times is po… read more
MASTER TECH
MASTER TECH
Master Tech
Vocational, Technical or Trade Scho
5,763 satisfied customers
my engine cranks but the car wont start. i changed timing belt
my engine cranks but the car wont start. i changed timing belt and I checked spark and fuel… read more
Your Auto Inspector
Your Auto Inspector
Assistant Service Manager
In course of study for bachelor's d
847 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I took the Power Steering O-Ring service bulletin linked from JustAnswer to my Acura dealer, and not only did they no-charge the o-ring, they also replaced the power steering pump at no cost.

Gary RStevenson Ranch, CA

Thank you very much for saving my daughter and her family a lot of money on her Honda. You are definitely on my list for future help. Thanks, again.

FredUSA

I just heard from my mechanic. You were right...a $45.00 job. THANK YOU!! Your response was received in less than 10 minutes!!

Linda B.USA

Your answers were clear and the diagrams were perfect. Dealer wanted $87 for an hour of labor and even I did it in 15 minutes.

EdUSA

HONDA PLATINUM was great. I really appreciate his help. I was ready to trade my new Honda until he told me to wait until I got 3,000 miles on it and my gas mileage would get much better.

SummerUSA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

thebesthonda

thebesthonda

ASE MasterTechnician

785 satisfied customers

26 years experience

Kyle N.

Kyle N.

ASE Certified Tech

631 satisfied customers

Master ASE Tech, Ca. smog lic

George H.

George H.

ASE Certified Technician

471 satisfied customers

ASE Master Tech 15+ years w/L1 Drivability certification

HONDASERVICE7791

HONDASERVICE7791

TECHNICIAN

462 satisfied customers

OVER 20 YRS EXPERIENCE, OVER 10 YRS ACURA/HONDA EXPERIENCE

Andrew

Andrew

ASE Master Tech

350 satisfied customers

Master tech for 11 years.

Chris (aka- Moose)

Chris (aka- Moose)

Acura Technician

287 satisfied customers

16 years of experience

Don - Mo Lurch

Don - Mo Lurch

Acura Mechanic

158 satisfied customers

Aftermarket & Factory Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x