How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Acura Technician
Category: Acura
Satisfied Customers: 47661
Experience:  16 years of experience
Type Your Acura Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

How to replace plug on engine harness of 2008 accura rl

Customer Question

how to replace plug on engine harness of 2008 accura rl
Submitted: 1 year ago.
Category: Acura
Customer: replied 1 year ago.
some wires have been gnawed by rodents. How can I avoid expense of a new wiring harness when all it needs is the end plug?
Expert:  Chris (aka- Moose) replied 1 year ago.

On the connector there should be a pin lock, that is on the pin face or wire side. You need to remove this, then use a pick to unlock the pins so you can pull the wire and pin from the back of the connector. Another option is a new pigtail, where as you cut the wires and splice them with solder and heat shrink tubing.

You want a excellent 5 star answer & I would like to be rated the same for providing it. Consider I don't know your skill level & I can't see, smell, hear, or touch the vehicle. It may take a few back and forth replies. Try your best to respond with good detail so I can do the same. I normally log in at 3pm and work late. A rating is required. Your rating me, what I type. I am not an employee of this website, nor have control over the fees or the time it took to get a response. If you rate negative or not at all you still paid, but I get nothing. I want you pleased with me and my efforts, so let me know if your experience here has come up short.

Thanks Chris