How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag, Tech and Instructor
Category: VW
Satisfied Customers: 6989
Experience:  Since 1975
Type Your VW Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

Had my 2003 jetta 2.0 scanned came up with multiple misfire

Customer Question

Had my 2003 jetta 2.0 scanned came up with multiple misfire codes. Replaced wires plugs and coil. With new coil in, disconnected both sides of the battery and cleaned. Now the car won't start. Turns over but won't run
Submitted: 3 months ago.
Category: VW
Expert:  rpmdiag replied 3 months ago.

Hi, I'm Ron and I will be helping you today.
Stand by for a moment while I prepare your answer.

Expert:  rpmdiag replied 3 months ago.

I attached a relearn procedure for you to follow. If this doesn't work, we may need to attach a scan tool to your computer system to see what went wrong. But also check for spark at the plugs and check fuel pressure with a gauge.

Thanks, Ron

Expert:  rpmdiag replied 3 months ago.

If you are satisfied with my answer, I would greatly appreciate a 5
star rating now and I will still assist you after you have rated me
too if another question pops up. I don’t get credit for helping you
until you rate me.
Thanks again, Ron

Related VW Questions