How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: VW
Satisfied Customers: 3020
Experience:  Owner at Carolina Auto Service & Sales , 20 years Experience in Foreign& Domestic vehicles
45790705
Type Your VW Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

I checked the fuses and I cannot start engine now. Starter

Customer Question

Hi, I checked the fuses and I cannot start engine now. Starter is running. What fuse I shacked can be affected for this?
JA: Most vehicles have two fuse panels. Have you located both?
Customer: I checked both panels
JA: What is the model/year of your VW?
Customer: VW rabbit 2007 2.5L
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Not sure. I just checked all fuses and didn't tatch any other parts. What it is can be?
Submitted: 10 months ago.
Category: VW
Expert:  Chad Farhat replied 10 months ago.

Hi, I'm Chad ,Welcome To JustAnswer, I'm reviewing your question and I will be be posting a replay ASAP

Expert:  Chad Farhat replied 10 months ago.

is there a security light on or flashing on dash while you trying to start it ?

so it spins over but it want start is that correct or it want turn over at all?

do you have one or 2 keys for it ?

are you looking to fix this yourself or you want have an idea what is going on ,?

Thank You

please let me know

Chad farfhat

ASE Certified Technician

Customer: replied 10 months ago.
Turned, not start
2 keys
I hope if it's easy
Expert:  Chad Farhat replied 10 months ago.

your Security alarm is triggered on

have you tried using the second key to start it , in case it loss synchronization with the key ?

Can you do this for now and see if that will reset the security module

Master reset Procedure

1- Disconnect Battery Cables ( Negative & Positive Cables )

2- Hold cables Together for 20 secs ,then let go

3- Wait 10 minutes

4- Make sure all doors are closed

5- Reconnect battery Cables

6- Lock & unlock car using the ignition key or key fob from driver side if with key

7- Enter vehicle and try to start

Please let me know

Thank You
Chad Farhat
ASE Certfied Technician

Customer: replied 10 months ago.
No effect after all process. Any suggestions?
Expert:  Chad Farhat replied 10 months ago.

is the security light still on correct ?

Expert:  Chad Farhat replied 10 months ago.

at this time we need the security module scanned for fault codes , the security system has several components that can trigger this

Key rf signal ius weak, key signal module receiver , key antenna , hood switch , door switch etccc.

Expert:  Chad Farhat replied 10 months ago.

if you get the fault codes let me know and i can help you further on it

Please let me know if you need anything else on this issue

Hope I was Helpful to you

A Positive Rating is Much Appreciated

This Post will stay open for you to come back and ask me any follow up questions you may have on this issue even after you rate me

Chad Farhat
ASE Certified Technician

Customer: replied 10 months ago.
it still on.
It's too sophisticate for me. And battery is almost discharged, cannot turn engine any more, just light and fan are on.
Sorry and buy.
Expert:  Chad Farhat replied 10 months ago.

no problem , hope i gave you good direction

good luck

Thank You

Chad