How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask vwnewton Your Own Question
vwnewton
vwnewton, VW Owner,ASE Master and L1 Advanced
Category: VW
Satisfied Customers: 307
Experience:  25 years of VW obsession turned into a job, last 15 years as a VW Tech.
13710235
Type Your VW Question Here...
vwnewton is online now
A new question is answered every 9 seconds

Need immediate help. 2000 1.8 turbo new beetle. Car turns

Customer Question

Need immediate help. 2000 1.8 turbo new beetle. Car turns over, will not start. The problem is NO CHECK ENGINE LIGHT at start up, not allowing car to start. Replaced ecu with used (programmed) unit. Still nothing. Continue to show codes 0725 1780 1850. Fuses and relays are good. Is there something I need to do to pair new ecu with car. something is keeping ecu from showing up on start up. Thanks for the help
Submitted: 1 year ago.
Category: VW
Expert:  Wolfgang replied 1 year ago.

Thanks for choosing Just Answer .
Below is my first answer or request for more information. If you do not understand it, or you need more information from me, or need me to go in more detail. Do not rate yet, just reply. Put yourself in my shoes, I can not see, smell, hear, feel or touch your car, nor do I know any history on it. So take into consideration I am doing my best based on what you tell me. Also understand fixing cars often requires sophisticated tools, that you may not own. So even if you can not do what is outlined in my answer, that does not mean my answer is wrong deserving to be rated negative.

Expert:  Wolfgang replied 1 year ago.

I do need a vin # ***** assist. Thanks

Customer: replied 1 year ago.
3vwcd21cxym485176
Customer: replied 1 year ago.
Hello?
Expert:  Wolfgang replied 1 year ago.

Sorry about that !! Got interrupted let me check into this.

Customer: replied 1 year ago.
I doubt it's connected, but the radio is not working either. Fuse is fine
Customer: replied 1 year ago.
It was the fuse on the back of the radio. Not related. Sorry
Expert:  Wolfgang replied 1 year ago.

ok do you have power at fuse 10 ?

Customer: replied 1 year ago.
11.6
Expert:  Wolfgang replied 1 year ago.

i need you to check if you have power at the ecu pin62 nd pin 3 of the ecu

Expert:  Wolfgang replied 1 year ago.

i'm going on the road home and will be off line for at least 1 - 2 hrs and will be back

Customer: replied 1 year ago.
They are not labeled. Got a diagram?
Customer: replied 1 year ago.
I'm getting power and ground to the ecu. Just not sure if it's the correct pins
Customer: replied 1 year ago.
Longest 2 hours ever.
Customer: replied 1 year ago.
Relist: Answer came too late.