How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: VW
Satisfied Customers: 33477
Experience:  ASE Certs.
7276279
Type Your VW Question Here...
Ron is online now
A new question is answered every 9 seconds

Volkswagen Jetta SE: My 2008 vw Jetta will not turnover. Changed

Customer Question

My 2008 vw Jetta will not turnover. Changed a relay on one of the engine cool & now will not start
Submitted: 1 year ago.
Category: VW
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
The no crank condition you are describing can be caused by any of the following,
Defective Power Supply Relay J682 — Terminal 50
Failed Power Supply Relay J682 Wiring — Terminal 50
Defective Starter
Defective Vehicle Electrical System Control Module J519
Failed Vehicle Electrical System Control Module J519 Wiring
Defective Voltage Supply Terminal 15 (B+) Relay J329
Failed Voltage Supply Terminal 15 (B+) Relay J329 Wiring
In order to determine the cause you are going to need to do some testing, I have enclosed the steps in the link below, copy and paste the link to your browser to open and view them.
https://dl.dropboxusercontent.com/u/104923897/VW%20start%20test%20Jul%2020.pdf