How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mario Your Own Question
Mario
Mario, ASE Certified Technician
Category: VW
Satisfied Customers: 136
Experience:  Retired Automotive instructor with over 45 years experience as a technician, service manager and teacher.
77311128
Type Your VW Question Here...
Mario is online now
A new question is answered every 9 seconds

Volkswagen Cabrio: fellow I'm getting frustrated just replace

Customer Question

HI fellow I'm getting frustrated just replace water pump and timing belt now im getting P0341 Cam shaft position sensor code. I have tried to set the timing several time already. could mean that maybe i missed a tooth alignment on the camshaft sprocket . Please help me .
Submitted: 1 year ago.
Category: VW
Expert:  Mario replied 1 year ago.
Hi, this is Mario and I will help you today.Two things I would check. First, make sure the timing marks are correct. I am attaching the service information so you can see the proper procedure.Also, make sure the cam sensor and wiring and connector are not damaged in any way. Sometimes, a pin on the connector or sensor will get bent and won't make contact.If you feel my information is helpful, I would appreciate a positive rating, as this is the only way I am compensated for my service. THANK YOU.

Related VW Questions