How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask vwtech0405 Your Own Question
vwtech0405
vwtech0405, VW Technician
Category: VW
Satisfied Customers: 10628
Experience:  VW Master Technician VW Certified
22815973
Type Your VW Question Here...
vwtech0405 is online now
A new question is answered every 9 seconds

Volkswagen Jetta: 2009 Jetta. After being driven for a little

This answer was rated:

2009 Jetta. After being driven for a little bit, all gear lights are coming on on dash. Car is not going into limp mode, drives just fine. Turning car off for a couple of minutes then back on, everything is back to normal.
Welcome to Just Answer!!!

You are getting faults in the Trans module auto zone does not have the capable scan tool to check the trouble codes in the Trans module that's why nothing came up, you will need a capable scan tool to check these faults . If the Trans is not going into limp mode it's more then likely a sensor issue . I hope this helps .

Positive feedback is highly appreciated thank you
Customer: replied 3 years ago.

If it is a sensor issue, do you think the sensor needs to be replaced?

Yes because it's triggering faults you need to have this checked to see what faults it's triggering. I hope this helps .

Positive feedback is highly appreciated thank you
vwtech0405 and 3 other VW Specialists are ready to help you

Related VW Questions