hi

i will send you instructions for this

Steering Column Switch/ Combination Switch/ Turn Signal Switch

Special tools and workshop equipment required
- Torque Wrench -V.A.G 1332- (40-200Nm).

NOTE:
- The following components are intergrated in the steering column switch. Turn Signal Switch -E2-, Headlamp Dimmer/ Flasher Switch -E4-, Parking Lamp Switch -E19-, Windshield Wiper Intermittent Regulator -E38-, Windshield Wiper/ Washer Switch -E22-, Multi-Function Indicator Mode Select Switch -E86- and Multi-Function Indicator Memory Switch -E109-.
- If vehicle is equipped with Cruise Control System (CCS), Cruise Control Switch -E45- and Cruise Control -SET- Button -E227- are integrated in steering column switch.

Removing:

NOTE:
- B

- Disconnect battery.

- Remove steering wheel.

Full Size Image

- Remove the two bolts -arrows-.

- Remove upper steering column switch trim -1-.

Full Size Image

- Remove the screws -arrows-.

- Remove the hex socket head bolt -1-.

- Loosen steering wheel height adjuster -2-.

- Remove the lower steering column switch trim -3-.

Full Size Image

- Loosen the hex socket head bolt -1-.

- Seperate the connectors -arrows- from the steering column switch.

Caution!
Airbag Spiral Spring/ Return Spring With Slip Ring -F138- remain on steering column switch. Make sure Airbag Spiral Spring/ Return Spring With Slip Ring -F138- are not twisted out of center position.

- Remove the steering column switch.

Installing:

Full Size Image

- Only attach steering column switch -2- on steering column, do not fasten yet.

- Attach steering wheel.

- Secure steering column switch -2- to steering column using socket head screw -3-, maintaining a gap dimensions to steering wheel -1- of -a- = 3mm.

- Remove steering wheel once more and continue with rest of installation.

Please RATE my answer by clicking the RATINGS button, so I can get credit for my work,,the [I EXPECTED MORE and HELPED A LITTLE rating does not give me credit].i don't receive commission if you give a less than 3 star/smiley rating ..I'm not always going to be giving you good news,so please don't let this stand in the way of you accepting my answer.it does not cost you more money.we will still be able to communicate.please understand,i can not see,hear or touch the vehicle and only know what you tell me. Bonuses and positive feedback are appreciated!if you are not satisfied with my answer,please do not leave bad feed back,i will gladly opt out and let another expert handle the question.if i have sent any diagrams,please print them.they will only stay on here for an hour or so...sometimes you may need to right click the image,then save picture as]to save it to your computer so you can open it with your picture program...PLEASE ASK IF YOU NEED MORE HELP

hi

i did not get that last reponse

hi