How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wolfgang Your Own Question
Wolfgang, VW Master Technician
Category: VW
Satisfied Customers: 4156
Experience:  Senior VW Master Tech 15 yrs
Type Your VW Question Here...
Wolfgang is online now
A new question is answered every 9 seconds

Volkswagen Jetta TDI I have a 2006 Jetta TDI. Loss of power

Resolved Question:

I have a 2006 Jetta TDI. Loss of power when shifting between 1st and 2nd and it seems like it wants to stall at that time. Runs fine otherwise. Getting a P2564 and a P2413 code. Changed out the EGR already. Same problem. Been searching around the web and found something about a Turbo Van Position Sensor and it's connectors/wires being faulty. Any chance that's the problem or could it be something else?
Submitted: 5 years ago.
Category: VW
Expert:  Wolfgang replied 5 years ago.

hello there


what scan tool are using please?


i do need your vin # XXXXX the vehicle


17 digits long starts with 3VW



Customer: replied 5 years ago.

Scantool is a INNOVA Can OBD2 Diagnostic Tool 3100


Expert:  Wolfgang replied 5 years ago.

ok you will have to go under the vehicle and to the turbo there is a 3 wire connector that usually the wire breaks and then you get this code!!! p2564 code


need to get this code repaired first and then retest !!




Customer: replied 5 years ago.
Is there a Turbo Vane Position Sensor associated with that 3 wire connector?
Expert:  Wolfgang replied 5 years ago.
Yes that is it check the wiring to that. Usually broken wires there
It has a vacuum line on it too
Wolfgang and 3 other VW Specialists are ready to help you