How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Cardoctor74 Your Own Question
Cardoctor74
Cardoctor74, ASE Certified Technician
Category: VW
Satisfied Customers: 25944
Experience:  Certified to fix all makes and models
3827149
Type Your VW Question Here...
Cardoctor74 is online now
A new question is answered every 9 seconds

2005 TDI PASSAT TROUBLE CODE PO-741 TORQUE CONVERTER CLUTCH

Resolved Question:

2005 TDI PASSAT TROUBLE CODE PO-741 TORQUE CONVERTER CLUTCH CIRCUIT
Submitted: 6 years ago.
Category: VW
Expert:  Cardoctor74 replied 6 years ago.
This is telling you there is an issue with the torque converter was it replaced yet? Does it go into lock up allot?
Customer: replied 6 years ago.
it has not been replaced. car drives normal- only issue is check engine light
Expert:  Cardoctor74 replied 6 years ago.
Ok the torque converter needs to be checked next. Very common for this code. It goes into lockup causing this issue . It can also be the solenod pack. They should diagnose this with the VAG COM scanner hooked up in the data list screen. They can check all sensor reading and torque converter operstion to see what's actually failing . These are the next steps . Positive feedback and bonuses greatly appreciated.
Cardoctor74 and other VW Specialists are ready to help you

Related VW Questions