How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Christopher Your Own Question
Christopher
Christopher, VW Technician
Category: VW
Satisfied Customers: 438
Experience:  VW Body Electrical Specialist, Expert Level Technician
10218570
Type Your VW Question Here...
Christopher is online now
A new question is answered every 9 seconds

96 VW Jetta: L..2 codes P0341 with description P1426 says

Resolved Question:

96 VW Jetta basic 2.0 L engine
2 codes   P0341 with description
P1426 says mfr specific, so I don't know what to look for
Submitted: 8 years ago.
Category: VW
Expert:  Christopher replied 8 years ago.
P0341Camshaft Position Sensor "Intake" Circuit Range/Performance, Bank 1 or Single Sensor

Check Camshaft Position (CMP) Sensor -G40:

l All electrical consumers such as lights and rear window defroster must be switched off.
l For vehicles with automatic transmission, selector lever must be in P.
l Ignition switched off.
Checking voltage supply
- Switch ignition on.
- Switch ignition off.
- Check wires according to wiring diagram.

 

P1426Evaporative Emission System Pure Control Valve Circuit, Open

Check Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-

EVAP Canister Purge Regulator Valve 1, Checking
→ Wiring diagrams, Troubleshooting & Component locations
l Ignition switched off.
Test sequence
t Vehicles through 08.99 → Item,
→ Item.
Specified value: 22.0 to 30.0 Ω
- Replace Evaporative Emission (EVAP) Canister Purge Regulator Valve (-N80-):
→ Item,
→ Item.
→ Chapter, Diagnostic mode 4: Reset/erase diagnostic data.
→ Chapter.
- Check wires according to wiring diagram.
Checking wiring
→ Chapter, connect test box for wiring test.
Vehicles through 08.99
Wire resistance: max. 1.5 Ω
Wire resistance: max. 1.5 Ω
→ Chapter, Diagnostic mode 4: Reset/erase diagnostic data.
→ Chapter.
- Replace Motronic Engine Control Module (ECM) -J220-

 

Christopher and other VW Specialists are ready to help you