How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Enes Your Own Question
Enes
Enes, VOLVO Master Technician
Category: Volvo
Satisfied Customers: 5469
Experience:  15+YEARS WITH VOLVO AS THE MASTER VOLVO MECHANIC&Ase
20168386
Type Your Volvo Question Here...
Enes is online now
A new question is answered every 9 seconds

Volvo S80 key fib was put in the ignition with the metal

Customer Question

Volvo S80 key fib was put in the ignition with the metal end. I can't remove.
JA: Any trouble turning the key in the ignition? Do you have a key fob?
Customer: Key fob
JA: What year is your S80?
Customer: .no turning
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I've tried jigging the fib left and right
JA: Anything else you think the mechanic should know?
Customer: I don't think so
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Volvo Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Volvo
Expert:  cloe0626 replied 5 months ago.

is your steering wheel locked dose the battery have power

Customer: replied 5 months ago.
Will chk but can't for a couple of hours. Not at home
Customer: replied 5 months ago.
Just to clarify. The metal end was inserted
Expert:  cloe0626 replied 5 months ago.

it has the flip out key

Customer: replied 5 months ago.
Not sure what that means
Expert:  cloe0626 replied 5 months ago.

it has metal piece that flips out

Customer: replied 5 months ago.
I believe the metal piece comes out. I. This situation the metal end is inserted so I don't have access to it
Expert:  Enes replied 5 months ago.

if you put key backwards only way now is spray slight wd40 in push star hole and have some good pliers grab the remote hard and pull back and forth there is no steps that is how we do at dealer if it brakes is gone brake either way if you take to shop so try on your own worst case you wil need new push start hole replaced and maybe new remote but again if you pull it out it will be all fine