How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Volvo
Satisfied Customers: 15295
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Volvo Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

Replaced rack and pinion on my 1991 Volvo Gle turbo same one

Customer Question

replaced rack and pinion on my 1991 Volvo Gle turbo same one as the old but the stering collum wont reach
Submitted: 1 year ago.
Category: Volvo
Expert:  Tim Mohr replied 1 year ago.

Hi, my name is ***** ***** yoke that attaches to the rack is on a slide tube, you can tap it down until it reaches the rack shaft, the tube can be diffiult, but tap it with a small hammer, it will move down,Tim

Customer: replied 1 year ago.
it seems to be all the way to the end to the tac weld
Expert:  Tim Mohr replied 1 year ago.

it will go all the way down, just tap it with a hammer,Tim