How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Enes Your Own Question
Enes
Enes, VOLVO Master Technician
Category: Volvo
Satisfied Customers: 5468
Experience:  15+YEARS WITH VOLVO AS THE MASTER VOLVO MECHANIC&Ase
20168386
Type Your Volvo Question Here...
Enes is online now
A new question is answered every 9 seconds

2009 volvo s60 2.5 turbo, broke bolts in front camshaft pulley?

Customer Question

2009 volvo s60 2.5 turbo, broke bolts in front camshaft pulley? what would be cause by timing marks car is in time but it did bend timing belt tensioner
Submitted: 1 year ago.
Category: Volvo
Customer: replied 1 year ago.
need to know what could cause this,
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 1 year ago.
A typed response is ok just in a hurry for answers.thanks
Customer: replied 1 year ago.
anyone out there
Customer: replied 1 year ago.
still waiting on response
Expert:  Enes replied 1 year ago.
Is very rare to see that bolt brake off most the time they broke what I see there was some service done in past and they overtourqe
Expert:  Enes replied 1 year ago.
So your belt broke also ? What happen you drove car and all broke a part ? Give me more info or maybe send video ?
Customer: replied 1 year ago.
Bolt cut piece of belt. Dont have video other than prior service what could cause this issue
Customer: replied 1 year ago.
What damage normally occurs from this happening
Expert:  Enes replied 1 year ago.
What you saying is most the time bent valves cylinder head will come out and repaired or replaced no way around it
Customer: replied 1 year ago.
What else could cause this to happen a timing belt service doesn't require touching these bolts. Trying to get ideas on what could have failed to cause this to happen.
Expert:  Enes replied 1 year ago.
Belt wrong Installed , belt cheaper brand used , tensioner pulley wrong adjusted , timing hub whet bolts go not re checked with service or overtourqed
Expert:  Enes replied 1 year ago.
Who installed belt ? Please rate answer now positive we stay locked if you can you can reply back
Customer: replied 1 year ago.
We installed belt belt still time we never touched pulley bolts we use torque wrench for tensioner pulleys. Dayco parts
Customer: replied 1 year ago.
Tensioner only fits one way its slotted. Timing marks all still match in time.
Expert:  Enes replied 1 year ago.
I'd hard to say what happen. For sure most the time installation wrong but I can't confirm that without looking and feeling I can only say what i see on average