How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Camera and Video
Satisfied Customers: 16687
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Camera and Video Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a Nikon D610 and SB5000 and SB910 flashes. I was

Customer Question

I have a Nikon D610 and SB5000 and SB910 flashes. I was using commander mode, both flashes were firing, then both stopped firing. I know I must have changed some setting on the camera accidentally, but I cannot find it. I have checked and rechecked the settings on the camera and flashes, and they are correct according to the manuals. Any suggestions?
Submitted: 9 months ago.
Category: Camera and Video
Expert:  Pete replied 9 months ago.

Hi Steve,

Have you tried shooting in different modes, e.g. Auto?

If resetting the camera to defaults did not help then it is not a setting problem - something may have failed in the camera's hardware.