How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Mike the Mac Medic Your Own Question

Mike the Mac Medic
Mike the Mac Medic, Camera and Video Technician
Category: Camera and Video
Satisfied Customers: 8694
Experience:  Amateur photographer since I had my own darkroom at age 12.
25267123
Type Your Camera and Video Question Here...
Mike the Mac Medic is online now
A new question is answered every 9 seconds

I have just bought and ready to install a second camera in

Customer Question

I have just bought and ready to install a second camera in my home, but need help to connect to my IPhone 6 Plus. Can you help me?
Submitted: 8 months ago.
Category: Camera and Video
Customer: replied 8 months ago.
Both of my my cameras are "Netcam Belkin
Wi-Fi Camera with Night Vision".
Expert:  Pete replied 8 months ago.
Hi Danny,To set up the new camera, connect your iPhone to the NetCam Wi-Fi signal first. To do this, go to “Settings > Wi-Fi” on your iPhone and connect to the camera’s Wi-Fi signal there.Once your device establishes a connection with the camera, launch the NetCam App and click Yes to set up the new camera.The camera will show you a preview after successfully connecting to your device. You should then click “Connect Camera to Internet" and choose the Wi-Fi network you want to use to connect the camera to the Internet.Once setup is complete, click Finish.
Customer: replied 8 months ago.
Pete, you did not answer my question!I have already successfully connected my 1st Netcam Belkin Wi-Fi Camera with Night Vision to my iPhone 6 Plus. But my unanswered question to you again is, how do I connect my 2nd Netcam Belkin Wi-Fi Camera with Night Vision to my iPhone 6 Plus so that my iPhone sees it as well? When I bring up the Netcam App, it only sees my 1st camera & NOT my 2nd camera. What instructions do you recommend at this point??
Model: Netcam Belkin Wi-Fi Camera with Night Vision
Expert:  Pete replied 8 months ago.
Hi,You need to perform the same setup procedure for the second camera to install it and connect it, then access it.
Customer: replied 8 months ago.
Pete,
Your 2nd reply to my original question, still does not resolve my problem of connecting my 2nd Camera to my IPhone 6 Plus. When I try to follow the same steps to connect my 2nd Camera to my IPhone as I did my 1st Camera, it does NOT work. I go to my Netcam App to connect my 2nd Camera as I did with my 1st Camera to the Wi-Fi, my iPhone does not see the 2nd Camera to connect to the Wi-Fi, it only the sees the 1st Camera. So that is where I am stuck. If you are unable to satisfactory help me with my 2nd Camera connection problem, perhaps you can refer another tec expert to me? Thanks!
Expert:  Pete replied 8 months ago.
Ok, let me see if another expert can assist you further with this.
Expert:  Mike the Mac Medic replied 8 months ago.
Try unplugging the second camera from power and allow it to restart and get a new IP address then try your app again

Related Camera and Video Questions