How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Russell A. Your Own Question

Russell A.
Russell A., Camera and Video Technician
Category: Camera and Video
Satisfied Customers: 6003
Experience:  30 years of experience as a TV station technician gives me a unique understanding of technical equipment issues.
24675295
Type Your Camera and Video Question Here...
Russell A. is online now
A new question is answered every 9 seconds

My lens is stuck on my camera and it won't come out. It

Customer Question

My lens is stuck on my camera and it won't come out. It looks like it is crooked in the camera barrel. I charged it, and it still didn't work. The lens cover is half open.
Submitted: 8 months ago.
Category: Camera and Video
Expert:  Russell A. replied 8 months ago.

Hi,

Put the camera switch in the Off position. Place it on the back with the lens facing up and take a look at the spacing between the lens and the lens housing. If you notice that the gap is not even all the way around the lens, the problem should be easy to fix. This type of a problem usually occurs if the camera was dropped or accidentally turned on while the lens is restricted.

Next, apply gentle pressure down the lens on the side where the gap is the biggest. You should hear a "click" as it pops back into place. Try powering the camera on.

If the lens doesn't extend at all or it extends, and then retracts again, do the following. Turn the camera off. Take the camera in one hand and with the other gently take one part of the lens and gently move it round in a circular movement. Do so with both sections of the lens. You will hear a "click" as it pops back in place. Power the camera on.

Next, try to pull and twist on the largest ring of the lens while turning the camera on. Listen for a "click". If at first the focus seems to be off, turn the camera on and off and take lots of pictures, close ups and distance. Focus should slowly start improving.

Even if the lens extends, it is quite possible that it does not make it to the correct sensor point due to the misalignment. A lens position error will halt the camera start up process. Lens errors are a common problem. Dirt can get into the gears or the lens can become misaligned from being carried in pockets, purses or at the beach. With newer cameras I am usually hesitant to suggest these options since they include some more extreme procedures that may cause further damage if not done correctly, but they may save you an expensive repair bill. The two links below give step by step DIY instructions on troubleshooting and attempting to fix this problem. An older Canon camera is used to demonstrate these procedures but, the lens structure of these compact cameras is the same so the examples do apply to this unit. These procedures are effective about 60% of the time. Click on or copy and paste the links into your browser.

http://www.e18error.com/repair.html

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Please keep in mind that my diagnosis & solutions provided are directly dependent on the accuracy of your description of the problem. As with any "do it yourself" fixes, success is a "team effort", since I can't see or touch the camera, and relies on the customer's manual dexterity and ability to follow the instructions well.

If you require additional information, please use the Reply to Expert Tab to contact me. Click the ratings only after our exchange is complete and you are satisfied.

If you are satisfied that my answer is accurate, or has provided a reasonable alternative solution please do not forget to rate my answer OK, Good or Excellent.

Thank you

Related Camera and Video Questions