How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Dan Your Own Question

Dan
Dan, Camera and Video Technician
Category: Camera and Video
Satisfied Customers: 1459
Experience:  25 Years CCTV, CATV, and SMATV setup and installation.
1567601
Type Your Camera and Video Question Here...
Dan is online now
A new question is answered every 9 seconds

I have an analog CCTV with cameras approximately 600' from

Customer Question

I have an analog CCTV with cameras approximately 600' from the DVR using a 22 gauge Ickey Pic shielded cable. The picture on the monitor has lines and appears clear then distorts.
I installed a VID4AMP amplifier which didn't clear up the problem.
Any suggestions?
Submitted: 9 months ago.
Category: Camera and Video
Expert:  Dan replied 9 months ago.

Hello and thank you for your question. I look forward to assisting you today. You have an impedance mismatch and will need what is called a balun at each end to correct the problem.

Related Camera and Video Questions